Correlation Engine 2.0
Clear Search sequence regions

Sizes of these terms reflect their relevance to your search.

Selective laser melting (SLM) additive manufacturing (AM) technology is a current option to fabricate cobalt-chromium (Co-Cr) metal frameworks for dental prostheses. However, the Co-Cr alloy composition, surface roughness, and ceramic bond strength values that SLM metals can obtain are not well-defined. The purpose of this in vitro study was to compare the chemical composition, surface roughness, and ceramic shear bond strength of the milled and SLM Co-Cr dental alloys. A total of 50 disks of 5 mm in diameter and 1 mm in thickness were fabricated by using subtractive (control group) and AM with each of following SLM providers: SLM-1 (EOS), SLM-2 (3D systems), and SLM-3 (Concept Laser). The milled disks were airborne-particle abraded with 100-μm aluminum oxide particles. All the specimens were cleaned before surface roughness (Ra), weight (Wt%), and atomic (At%) percentages were analyzed. Three-dimensional profilometry was used to analyze the topographical properties of the surface parameters Ra (mean surface roughness). The chemical composition of Co-Cr alloy specimens was determined by using energy dispersive X-ray (EDAX) elemental analysis in a scanning electron microscope (SEM). Thereafter, the specimens were bonded to a ceramic (Dentine A3 and Enamel S-59; Creation CC) interface. Specimens were stored for 24 hours at 23 °C. The bond strength of the SLM-ceramic interface was measured by using the macroshear test (SBT) method (n=10). Adhesion tests were performed in a universal testing machine (1 mm/min). The Shapiro-Wilk test revealed that the chemical composition data were not normally distributed. Therefore, the atomic (At%) and weight percentages (Wt%) were analyzed by using the Kruskal-Wallis test, followed by pairwise Mann-Whitney U tests between the control and AM groups (AM-1 to AM-4). However, the Shapiro-Wilk test revealed that the surface roughness (Ra) and ceramic bond strength data were normally distributed. Therefore, data were analyzed by using 1-way ANOVA, followed by the post hoc Sidak test (α=.05). Significant differences were obtained in Wt%, At%, and Ra values among the Co-Cr alloys evaluated (P<.05). Furthermore, the control group revealed significantly lower mean ±standard deviation Ra values (0.79 ±0.11 μm), followed by AM-3 (1.57 ±0.15 μm), AM-2 (1.80 ±0.43 μm), AM-1 (2.43 ±0.34 μm), and AM-4 (2.84 ±0.27 μm). However, no significant differences were obtained in the metal-ceramic shear bond strength among the different groups evaluated, ranging from mean ±standard deviation 75.77 ±11.92 MPa to 83.65 ±12.21 MPa. Co-Cr dental alloys demonstrated a significant difference in their chemical compositions. Subtractive and additive manufacturing procedures demonstrated a significant influence on the surface roughness of the Co-Cr alloy specimens. However, the metal-ceramic shear bond strength of Co-Cr alloys was found to be independent of the manufacturing process. Copyright © 2020 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.


Marta Revilla-León, Nadin Al-Haj Husain, Mohammed Mujtaba Methani, Mutlu Özcan. Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys. The Journal of prosthetic dentistry. 2021 May;125(5):825-831

Expand section icon Mesh Tags

Expand section icon Substances

PMID: 32466963

View Full Text