Correlation Engine 2.0
Clear Search sequence regions


  • ammonium (1)
  • cobalt (9)
  • electrolysis (1)
  • equilibrium (2)
  • ion (2)
  • lithium (10)
  • ph 3 (1)
  • power supplies (1)
  • reaction time (1)
  • solvent (1)
  • Sizes of these terms reflect their relevance to your search.

    Novel route has been developed to selectively extract lithium (Li), cobalt (Co) and manganese (Mn) from the leach liquor of discarded lithium ion batteries (LIBs) containing 1.4 g/L Cu, 1.1 g/L Ni, 11.9 g/L Co, 6.9 g/L Mn and 1.2 g/L Li. Initially, Cu and Ni were extracted by solvent extraction techniques using 10% LIX 84-IC at equilibrium (Eq.) pH 3 and 4.6, respectively. Subsequently, precipitation studies were carried out at different conditions such as pH, reaction time, precipitant concentration etc., to optimize the parameters for selective precipitation of Co from the leach liquor. Result showed that 99.2% Co was precipitated from the leach liquor (11.9 g/L Co, 6.9 g/L Mn and 1.2 g/L Li) after extraction of Cu and Ni in a range of pH 2.9 to 3.1 using un-diluted ammonium sulfide solution (10% v/v) as a precipitant at 30 °C, while only 0.89% Mn and 0.62% Li were co-precipitated. After Co precipitation, 98.9% Mn was extracted from the filtrate using 10% D2EHPA at equilibrium pH 4.5, and Li remained in raffinate. From the obtained purified solution, metals could be recovered either in a form of salt/metals by precipitation/ evaporation/ electrolysis method. Copyright © 2020 Elsevier Ltd. All rights reserved.

    Citation

    Pankaj Kumar Choubey, Om Shankar Dinkar, Rekha Panda, Archana Kumari, Manis Kumar Jha, Devendra Deo Pathak. Selective extraction and separation of Li, Co and Mn from leach liquor of discarded lithium ion batteries (LIBs). Waste management (New York, N.Y.). 2021 Feb 15;121:452-457

    Expand section icon Mesh Tags

    Expand section icon Substances


    PMID: 33358248

    View Full Text