Design and Characterization of a Screw Extrusion Hot-End for Fused Deposition Modeling.

Tim Feuerbach, Markus Thommes

Molecules (Basel, Switzerland) 2021 Jan 23

filter terms:

The filament is the most widespread feedstock material form used for fused deposition modeling printers. Filaments must be manufactured with tight dimensional tolerances, both to be processable in the hot-end and to obtain printed objects of high quality. The ability to successfully feed the filament into the printer is also related to the mechanical properties of the filament, which are often insufficient for pharmaceutically relevant excipients. In the scope of this work, an 8 mm single screw hot-end was designed and characterized, which allows direct printing of materials from their powder form and does not require an intermediate filament. The capability of the hot-end to increase the range of applicable excipients to fused deposition modeling was demonstrated by processing and printing several excipients that are not suitable for fused deposition modeling in their filament forms, such as ethylene vinyl acetate and poly(1-vinylpyrrolidone-co-vinyl acetate). The conveying characteristic of the screw was investigated experimentally with all materials and was in agreement with an established model from literature. The complete design information, such as the screw geometry and the hot-end dimensions, is provided in this work.

Citation

Tim Feuerbach, Markus Thommes. Design and Characterization of a Screw Extrusion Hot-End for Fused Deposition Modeling. Molecules (Basel, Switzerland). 2021 Jan 23;26(3)