Promoted iron corrosion and subsequent hexavalent chromium removal in zero-valent iron systems by oxidant activation.

Weiting Chen, Bing Li, Weizhao Yin, Weilong Zeng, Ping Li, Jinhua Wu

Chemosphere 2024 Mar

filter terms:

Zero-valent iron (ZVI), as an effective medium, is widely used to eliminate heavy metal ions in filter tanks. However, it will react with Cr(VI) to generate Fe-Cr precipitates with low conductivity on its surface, resulting in slow iron corrosion and low Cr(VI) removal efficiency. In this study, three oxidants (KMnO4, NaClO, and Na2S2O8) were employed to promote iron corrosion in ZVI systems for enhanced Cr(VI) removal at a concentration of 5 mg/L through batch tests and column experiments. The ZVI/KMnO4, ZVI/NaClO, and ZVI/Na2S2O8 systems achieved significantly higher Cr(VI) removal rates of 31.5%, 52.8%, and 65.9% than the ZVI system (9.8%). Solid phase characterization confirmed that these improvements were attributed to promoted iron corrosion and secondary mineral formation (e.g., lepidocrocite, ferrihydrite, and magnetite) by oxidants. Those minerals offered more reaction sites for Cr(VI) reduction, adsorption, and sequestration. Cycle experiments indicated that ZVI/oxidant systems could stably remove Cr(VI). In long-term column experiment, the ZVI/NaClO column showed a much longer life-span and exhibited a 34.8 times higher Cr(VI) removal capacity than that of the ZVI column. These findings demonstrated that ZVI in combination with a reasonable amount of oxidants was a promising method for removing Cr(VI) in practical filter tanks and provided a new insight to enhance Cr(VI) removal. Copyright © 2024. Published by Elsevier Ltd.

Citation

Weiting Chen, Bing Li, Weizhao Yin, Weilong Zeng, Ping Li, Jinhua Wu. Promoted iron corrosion and subsequent hexavalent chromium removal in zero-valent iron systems by oxidant activation. Chemosphere. 2024 Mar;352:141391